Ada beberapa macam Pencampur otomatis antara lain :
1. F805A
F805A is a full-fledged device of an all-in-one type that deserves to be called the top-of-the-line loadcell controller.
F805A adopts a color LCD touch panel which enables simple and comfortable operation by greatly enhancing the visibility of weight display, various setting values display and status display. It provides high-speed A/D conversion and digital processing capability at an operating speed of 1000 times/sec There are substantial interfaces that allow direct connection to major PLCs including OMRON DeviceNet and MITSUBISHI CC-Link. F805A, which was developed specifically for weighing systems, is a full-fledged device of an all-in-one type that deserves to be called the top-of-the-line loadcell controller.
F805A adopts a color LCD touch panel which enables simple and comfortable operation by greatly enhancing the visibility of weight display, various setting values display and status display. It provides high-speed A/D conversion and digital processing capability at an operating speed of 1000 times/sec There are substantial interfaces that allow direct connection to major PLCs including OMRON DeviceNet and MITSUBISHI CC-Link. F805A, which was developed specifically for weighing systems, is a full-fledged device of an all-in-one type that deserves to be called the top-of-the-line loadcell controller.
2. F805A-CK
Weighing systems for F805A-CK can be easily constructed to meet various types of application.
A weighing controller developed for check scales. “Dynamic mode” that is suitable for use when belt speed or dimensions of weighed items are not consistent, and “Static mode” that is handy for use when there is dispersion in weight data are available. Weighing systems can be easily constructed to meet various types of application.
A weighing controller developed for check scales. “Dynamic mode” that is suitable for use when belt speed or dimensions of weighed items are not consistent, and “Static mode” that is handy for use when there is dispersion in weight data are available. Weighing systems can be easily constructed to meet various types of application.
● Measurement results can be checked on the screen in real time, and various calculations derived by totaling function are also displayed.
● Function of registering 100 types of codes. Set values of standard setting, over and under can be pre-registered.
3. F805A-FB
A weighing controller developed for formula batch weighing.
A maximum of 200 types of formula and 100 types of raw materials can be pre-registered by switching over from feeding and discharging to allow automatic weighing.
● Registration of 200 types of formula and 100 types of raw materials
● A maximum of 30 types of raw materials for each formula can be pre-registered
● Process from weighing to discharging of each raw material is automated
● Function of displaying the numbers of raw materials being weighed
● Names for raw materials and formula are displayed in kana or kanji characters
● Timer control function
● Function of refilling when weight is under fixed quantity (Auto / Manual)
● Function of power cut security
● Weighing status message function
A maximum of 200 types of formula and 100 types of raw materials can be pre-registered by switching over from feeding and discharging to allow automatic weighing.
● Registration of 200 types of formula and 100 types of raw materials
● A maximum of 30 types of raw materials for each formula can be pre-registered
● Process from weighing to discharging of each raw material is automated
● Function of displaying the numbers of raw materials being weighed
● Names for raw materials and formula are displayed in kana or kanji characters
● Timer control function
● Function of refilling when weight is under fixed quantity (Auto / Manual)
● Function of power cut security
● Weighing status message function
4. F805A-CF
Automatic control of discharge and charging
A weighing controller developed for weight supply and loss-in-weight.
Automatic control of weight supply (discharge) and refilling (charging) is performed by calculating flow rate from the measurement of the discharged weight of material inside a hopper.
● Pulse input function
● Accumulated pulse output function
● PID control function
● Master-slave function (Convenient for control of sub-material supply hopper)
● Interlocking function
● Graphic function
● Weighing status message function
A weighing controller developed for weight supply and loss-in-weight.
Automatic control of weight supply (discharge) and refilling (charging) is performed by calculating flow rate from the measurement of the discharged weight of material inside a hopper.
● Pulse input function
● Accumulated pulse output function
● PID control function
● Master-slave function (Convenient for control of sub-material supply hopper)
● Interlocking function
● Graphic function
● Weighing status message function
5. F805
F805A is a full-fledged device of an all-in-one type that deserves to be called the top-of-the-line loadcell controller.
F805A adopts a color LCD touch panel which enables simple and comfortable operation by greatly enhancing the visibility of weight display, various setting values display and status display. It provides high-speed A/D conversion and digital processing capability at an operating speed of 1000 times/sec There are substantial interfaces that allow direct connection to major PLCs including OMRON DeviceNet and MITSUBISHI CC-Link. F805A, which was developed specifically for weighing systems, is a full-fledged device of an all-in-one type that deserves to be called the top-of-the-line loadcell controller.
F805A adopts a color LCD touch panel which enables simple and comfortable operation by greatly enhancing the visibility of weight display, various setting values display and status display. It provides high-speed A/D conversion and digital processing capability at an operating speed of 1000 times/sec There are substantial interfaces that allow direct connection to major PLCs including OMRON DeviceNet and MITSUBISHI CC-Link. F805A, which was developed specifically for weighing systems, is a full-fledged device of an all-in-one type that deserves to be called the top-of-the-line loadcell controller.
6. F805A-BC
The weight of raw material can be weighed while being transferred on belt conveyors.
A weighing controller developed for belt scales. The weight of raw material can be weighed while being transferred on belt conveyors. Feed rate, total, weight density, load ratio, etc., can be displayed and output by the input of a weight signal sent by the leadcell and the speed signal sent by the speed detector installed under the conveyor. In addition, flow can be controlled by setting the target value.
● Pulse input function
● Accumulated pulse output function
● Zero / span compensation function
● Graphic function
● Moisture content compensation function (Water content ratio can be set to compensate the total.)
● Alarm output
A weighing controller developed for belt scales. The weight of raw material can be weighed while being transferred on belt conveyors. Feed rate, total, weight density, load ratio, etc., can be displayed and output by the input of a weight signal sent by the leadcell and the speed signal sent by the speed detector installed under the conveyor. In addition, flow can be controlled by setting the target value.
● Pulse input function
● Accumulated pulse output function
● Zero / span compensation function
● Graphic function
● Moisture content compensation function (Water content ratio can be set to compensate the total.)
● Alarm output
7. F805A-MD
Powerful when used in heavy weighing work with small weighing scale.
A weighing controller developed for multi draft weighing.
Powerful when used in heavy weighing work with small weighing scale.
Each control function such as a rough feeding auto switch over and judgment condition can be suitably combined for “speedy” and “low-count yet effective” weighing.
● Rough feeding auto switch over (Rough charging and SP1/SP2 / SP3 are automatically switched over by Total.)
● Automatic calculation of batch count
● Graphic function
● Compensation weighing function (The ratio of remaining quantity to total final is monitored and Final of each batch is automatically compensated according to the accuracy of the weighing device.)
A weighing controller developed for multi draft weighing.
Powerful when used in heavy weighing work with small weighing scale.
Each control function such as a rough feeding auto switch over and judgment condition can be suitably combined for “speedy” and “low-count yet effective” weighing.
● Rough feeding auto switch over (Rough charging and SP1/SP2 / SP3 are automatically switched over by Total.)
● Automatic calculation of batch count
● Graphic function
● Compensation weighing function (The ratio of remaining quantity to total final is monitored and Final of each batch is automatically compensated according to the accuracy of the weighing device.)
.jpg)
0 komentar:
Posting Komentar